Solar 101 - Beginners Guide to Solar Panels, Clean Energy | Local &...

Solar 101: Beginner's Guide to Solar

A solar panel is a device that is designed to absorb energy from the sun rays to generate electricity. The electricity they produce is referred to as solar energy. Solar panels are the solution to saving a couple of bucks from your electricity bill. This article will cover the fundamental basics of solar power to guide the newbies looking forward to purchasing solar panels. Read on to learn more.

Back to Top

What is solar energy?

The sunlight that reaches earth constitutes 50% light (visible), 45% infrared radiation, ultraviolet rays, and electromagnetic radiation. The heat radiations trigger chemical reactions that produce electricity.

The energy generated from the sun is what is captured in the form of thermal or electric power. The latter captures the sun’s energy via flat plate collectors used in solar heating, which converts them to thermal energy. With electric energy, the sun’s radiation is captured through photovoltaic cells and directly converted into electricity.

What are solar panels made of?

The most common panels are made from crystalline silicon(c-Si) that has conductive properties. They have smaller squares with blue or black rectangular grids. These little squares are the silicon solar cells that are linked together to form a circuit.

There are others, thin-film solar panels designed with a semiconductor deposited on either glass or plastic.

How long do solar panels last?

You might be wondering how long solar panels last if you have considered investing in one. Well, a P.V. solar module can last for up to 25 or 30 years. That means that the panels can produce at least 80% of rated power in 25-30 years. It, however, doesn’t mean that they stop producing electricity after that.

How large are solar panels?

Traditional P.V. solar panels have a 60 and 72 cell configuration with the following dimensions:

  • 60 cell PV panels: 39″ x 65″ equivalent to 3.25 x 5.5 feet
  • 72 cell PV panel: 39″ x 77″ equivalent to 3.25 x 6.42 feet

What is the right solar energy system size for me?

It is just like the phone bill. You need as much airtime as your monthly bill shows. Similarly, your system size depends on how much power you need. This information can be found from your monthly utility bill.

The bill is not all you need- honestly, the sizing process is complicated, but you can leverage several online tools for that. There are both grid-tie and off-grid systems calculators. The most grid-tie calculator will ask you for your location and energy usage data. The system size is shown to you at the touch of a button.

For off-grid system sizing, you’ll be required to track your daily power usage for, say, a month and feed the data in a given sheet. You then upload the sheet or send it to your provider to determine what size you need.

If you feel like taking the challenge, you can also read about sizing a grid-tie or off-grid solar system by yourself.

Is investing in solar worth it?

Definitely yeah. In the majority of the cases, the solar option is cheaper than the grid supply. Depending on the grid entirely hooks you to an eternal monthly power bill. Should you go solar, you only incur a high capital cost, which breaks even in a few years. After that, your only charges will be taxation, maintenance, and repairs, all of which are far much less than the utility bill.

What do I need to get started?

To install a solar panel system, you will need several key components. Firstly, you will need solar panels that are sized appropriately for your energy needs and the available space. Secondly, you will need a mounting system to secure the panels to your roof or another suitable location. Thirdly, you will need an inverter to convert the direct current (DC) energy produced by the panels into alternating current (AC) energy that can be used in your home. Additionally, you may also need batteries to store excess energy and a monitoring system to track your energy production and usage.

A great place to start is to hire a licensed and experienced solar panel installer to ensure the system is properly installed and meets all safety and building code requirements.

How do I calculate the solar panel efficiency?

Solar panel efficiency is a widely misunderstood concept. People assume that the 15-25% efficiency of P.V. solar panels means that the panel produces only a fraction of the rated power. In reality, the efficiency represents how much of the sun’s energy is converted to electricity.

You should go for high-efficiency panels if you have limited mounting space as they produce more power per unit area.

Smaller R.V./mobile use panels are available. Some companies are also experimenting with 96-cell solar panels, but they are not very common.

What does net metering mean?

Also known as net energy metering, it is a utility resource usage and remuneration scheme whereby a consumer who harnesses their own solar power is compensated in monetary terms. If your home enjoys net metering and produces more energy than you need, you can send the extra power to the grid, so you use it when required.

Are batteries necessary for a solar energy system?

The inclusion of batteries depends on the type of solar system that you have installed. If the system is grid-tied, you do not have to include the batteries, unlike the off-grid systems. However, backup batteries are useful in storing excess power generated by your solar panels during peak times and using it in times of rolling blackouts.

What's the best type of battery for solar?

There are essentially three types of solar batteries; flooded lead-acid accumulators (FLA), sealed lead-acid accumulators (SLA), and lithium-ion batteries. FLA are the cheapest and the oldest but require regular maintenance for best operation. You just need to top up the battery with distilled water to account for the evaporation.

SLAs are advance FLAs, where the battery is sealed to prevent evaporation. They are a little bit more expensive than the FLAs but do not need maintenance.

Lithium-ion batteries represent the best tech in batteries. These are known to charge much faster than the other two types. They also withstand deep discharge cycles and last the longest, in addition to being maintenance-free.

What are the available solar incentives or tax credits?

Going solar? The Federal Tax Credit got your back. This is definitely the most significant incentive giving you 30% off your total project cost after filing with the IRS.

There are other state credits across the States, depending on the state regulations. Check with your local authorities on what incentives you might enjoy for going solar.

What are the available solar financing options?

There are three popular approaches to financing a solar panel project. These are personal loans, solar leases, and solar power purchasing agreements.

A personal loan would enable you to own the system, so you can claim the federal tax incentive. The incentive would then allow you to repay the loan before the due period elapses. On the other hand, a solar lease is owned by the installer to claim the Federal Tax credit, reducing your revenue on investment.

How do grid-tie and off-grid solar compare?

A grid-tied solar system is ideal for homeowners as it offers some security. It is cheaper than electricity from utility companies. Grid-tied can save you some few bucks through net metering, low installation, improved efficacy rates, and equipment costs. On the other hand, an off-grid is very suitable for cabins and isolated localities. These systems cost more as they need additional batteries. One might also need to consult with installation professionals to avoid any vulnerabilities that may hinder it from performing efficiently.

Does the local climate affect system size?

P.V. solar modules convert sunlight into electricity. This means the more the sunlight, the more the power produced. Different areas experience different exposure times during the day. Regions near the equator experience most extended exposure hours while Polar Regions may go without sunlight for days.

In the U.S., for example, the exposure varies between 3-6 hours. If you receive only three hours of sunlight, your system’s size would need to be twice that of a region receiving about six hours of exposure to sunlight.

Does solar affect the value of your home?

Recent studies indicate that a home with a solar system sells considerably higher than one without. The 3.74% higher price can make a big difference depending on the value of the house. This applies to solar systems owned by the seller and not for solar lease systems.

Can you run an entire house on solar alone?

It is possible to power your entire home with solar if your system is expansive enough, but that’s not easy for everyone to achieve. While solar panels can generate electricity during the day, they are not able to provide power 24/7, as they do not produce energy at night or during cloudy weather. Therefore, a battery backup system is often needed in order to store excess energy generated during the day for use at night or during low sunlight conditions. A battery backup system also provides a reliable source of electricity during power outages or other emergencies. Without a battery backup system, homeowners would still need to rely on the grid for electricity during periods of low solar production, negating the benefits of solar energy.

Do solar panels affect homeowners insurance?

Solar panels can have an impact on homeowners insurance, as they can increase the value of a property and its potential replacement cost. As a result, homeowners may need to adjust their insurance coverage to ensure adequate protection. Additionally, some insurance providers may offer discounts or incentives for homes with solar panels, as they may be viewed as less risky due to the potential for reduced electricity usage. Homeowners should consult with their insurance provider to discuss any potential impacts on their policy and ensure they have the appropriate coverage in place.

What are the components in a photovoltaic (P.V.) solar panel?

Converting solar radiation to electric energy is a complex process. The photovoltaic panels are the root of the successful energy conversion process to occur. But on their own, they are incapable of producing a reliable electric current. The panels require a channel of more components to make safe and usable energy. Check out those elements below:

  • Photovoltaic module

    This, as stated earlier, is the core element that houses solar cells. Every cell acts as a conversion unit that produces D.C. voltage when light from the sun hits it. Note that the P.V. modules can generate a voltage from any source of light, not just sunlight.

  • D.C. & AC wiring

    The DC and A.C. are responsible for switching on/off power to and from the inverter.

  • Inverters

    The solar inverter is responsible for taking D.C. from batteries and turning them to A.C.

  • Batteries

    These store electric energy chemically in renewable energy entities. They are also known as solar battery storage.

  • Solar controllers

    As its name suggests, the solar controller’s work is to regulate the current fed into the battery tank.

What are the benefits and setbacks of using P.V. solar panels?

Solar panels are what comes into our minds when solar energy is mentioned. Here are some of their upside and downsides:

Advantages of PV Solar Panels

  • They provide cheap, clean, and renewable energy.
  • The maintenance costs for P.V. panels are relatively low compared to other energy sources.
  • Photovoltaic systems are quiet, thus reducing the effect of environmental noise.
  • Solar energy can be harnessed locally, thus reducing environmental disruptions associated with transportation.
  • Solar power reduces the electricity bill as it costs you only a fraction of what you pay to the utility companies monthly.
  • Solar power plants have fewer safety risks compared to fossil and coal plants.

Disadvantages of PV Solar Panels

  • Photovoltaic modules produce variable energy. They cannot absorb energy during the night, and the amount of energy collected during the day also varies with weather seasons and time of the day.
  • Though not significant, there’s the production of toxic chemicals like arsenic and cadmium during the production process. These pollutants cause slight environmental impacts that can be tamed through responsible disposal.

What types of P.V. panels can you find in the market?

The most available P.V. solar panels are monocrystalline, polycrystalline, and thin-film. Each has its own unique properties, and they vary in appearance, performance, and even costs. For instance, monocrystalline is highly efficient, unlike Polycrystalline and thin-film, which perform inefficiently.

How effective are micro inverters?

Micro inverters are devise used in Photovoltaics to convert direct current to alternating current. They are designed with one inverter per P.V. panel, and they harness maximum power. Their design can also withstand extreme weather conditions. If any inverter goes out, the others will generate the electricity to their full capacity. It is also much easier to monitor any underperforming micro inverters panel and determines the exact problem.

What is a power optimizer?

Power optimizers are gadgets installed in a solar system to control individual panel’s output independently from the rest of the mini-grid. Unlike others like micro inverters, this gadget doesn’t convert any electricity but maximizes the power before sending it to the string inverter. This way, should one of the P.V. solar panels become shaded during a given time of day, the energy produced by the rest of the solar panels can be maximized.

What do string inverters do?

String inverters simply convert D.C. to A.C. power for the high voltage D.C. inputs. With a string inverter, the solar array is wired in series rather than in parallel.

What about string sizing?

When several P.V. solar panels are wired to a single output through an inverter, it is called a panel string. Inverters are usually rated for a specific maximum voltage. To safeguard against overloading the inverter, you must get the ideal string size that doesn’t waste any resources.

When doing a string sizing, consider local temperature conditions and the ratings of the P.V. modules to be used.

Where should you mount your solar panels?

You can mount your solar panels either on the ground or on the roof. Roof mount is usually the cheaper option, especially if you do not have much ground space for such a project. Roof mount utilizes the rooftop as the support structure, so you do not have to build a foundation for mounting. You can consult your roofing company if you intend to mount an array of P.V. panels on the roof. They can then decide the best type of roofing for you.

As the term suggests, a ground mount is built on the ground as a separate metal structure to hold the solar panels. These structures are preferably aluminum, which makes such a project costlier. The advantage is easier accessibility during repairs and maintenance.

Are pole mounts viable options?

Pole mounts are still a viable option in countries experiencing icy winters. A pole mount is essentially a tall-standing pole that raises the solar panel above the ground. The high height ensures the winter ground snow doesn’t bury the solar panels array. The poles also allow the solar panels company to tilt the panels so that snow can easily slide off. The poles may be of variable height depending on proximity to obstructions.

Solar trackers: what are they?

You might have observed some solar panels tilting towards the changing position of the sun in the sky. This is done by a solar tracker to maximize exposure of the solar cells to sunlight.

But is this investment worth it? It depends on your needs. Typically, the tracking hardware costs way above the solar panels! So if space is not much of a concern to you, simply invest in more solar panels.

Large-scale solar power farms can use this technology as the cost will drastically reduce as you scale the operation.

How much do solar installers charge?

A solar installer will charge you depending on several factors. Going by the law of demand and supply, the higher the number of locally available qualified solar installers, the lower the rates charged.

A good installer should not charge less than $0.75 per watt of solar power installation. On average, a 5kW system should cost you between $3,500 and $5,500.

Can you install the solar by yourself?

Definitely yes, even if you do not have any experience in it. This is because most of the components are designed to plug into dedicated ports. You should only expect to lift slightly heavy objects and tightening screws.

You can perform the above by yourself and then hire an experienced electrician to hookup to the panel for you. This way, you’ll significantly bring down the overall cost of installation. However, if you want things right from the bat, hiring an experienced solar panel installation company is the way to go.

Does my solar system require maintenance?

Yes, but to a small extent. You mostly need to clear any debris, accumulated snow, or dust on the P.V. modules. If your batteries are the FLA type, ensure to routinely check and top up the electrolyte level. Regular check-ups by professionals are an excellent way to ensure that your panels are performing at their best.


Additional Educational Solar Resources

Share these graphics on your social media page. Also, if you’re a student, don’t forget to apply for our Semper Solaris Scholarship